Queclink GV200 Spécifications télécharger pdf (Page 35)

GV200 @Track Air Interface Protocol

TRACGV200AN003 – 34 –

3.2.9. Input/Output Port Binding

This command is used to configure the user defined output-port action triggered by input ports. If

the IO combination is set and the corresponding condition appears, the device will output specified

wave shape on the specified output port. And the device will report message +RESP:GTIOB to

the backend server when the logical status of bound input ports changes.

 AT+GTIOB=

Example:

AT+GTIOB=gv200,1,1A,A,3,1,0,8,3,,,,,0008$

Parameter

Length(byte)

Range/Format

Default

Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv200

IOB ID 1 0 – 3

Input Mask <=2 0 – 1F 0

Trigger Mask <=2 0 – 1F 0

Input Sample Period <=2 0|1 – 12(×2s) 0

Output ID 1 0 – 4 0

Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <IOB ID>: ID of the user defined IO binding.

 <Input Mask>: Bitwise mask for input ports composition. Each bit, from bit 0 to bit 3,

represents one digital input port. Set to 1 to enable and 0 to disable corresponding input port.

 bit0: digital input 1

 bit1: digital input 2

 bit2: digital input 3

 bit3: digital input 4

 <Trigger Mask>: bitwise mask for trigger condition composition of the corresponding input

ports. Each bit, from bit 0 to bit 3, represents the logical status of the corresponding input

Queclink

Confidential

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 258 259

Pas de commentaire

Queclink GV200 Spécifications Page 35